AM Receiver with a FET
This project was created with the aim of creating a very simple receiver to hear the AM modulation of the CB in my town. It is not a recent creation, is a couple of years old , but recently i picked up from the drawer of the “memories”.
My receiver can, in theory, cover the range between 16 and 30 MHz, using an active FET BF245. This is a classic pattern of reaction receiver, carried out through retroactive part of the signal routed to the gate of the FET through the tuning circuit consisting of L2, C1 and the varicap diode DV1. The amount of reaction, upon which the sensitivity of the system, is determined by potentiometer R5. If you exceed in that regulation of reaction, the receiver will come under the self-oscillation, so you have to training your ear, is a matter of habit in use such of these receivers, which are well attuned to the adjustment of the reaction.
We notice that they are self oscillatory regime when through the headphones you hear a whistle that covers all possible received signals.
The line is controlled by the varicap DV1, and adjusted by varying the voltage applied to it using the potentiometer R3.
The low-frequency output is taken through the electrolytic capacitor C5 (a tantalum would be perfect), after filtering the high frequency components through C4. Of course, as you can see, the level of the output signal is too low to be heard directly in the headphone or speaker, but just any preamplifier with high input impedance and a small glides, TDAxxxx for example, to listen in speaker. For my tests i used the mic input of my stereo system, and the clarity of the signal was discrete, reminding us that the receiver is still very simple.
The construction of the coils L1/L2, to wrap up over ferromagnetic core, is a crucial part of the project. In fact the only action on the tuning knob us to vary the bandwidth up to 6-7MHz, not making us cover the entire band from 16 MHz to 30 MHz for this fact is necessary to calibrate the ferromagnetic core, with an anti-inductive screwdriver, so that we can focus our band of interest, if the lower (16 to 23 MHz) or upper (23 – 30 MHz). The coil L2 is formed by 12 turns of enamelled copper wire of 0.5 – 0.6 mm in diameter up to a base with a core of 6 mm in diameter, taking a grip in the fourth coil to ground. The coil L1 is wound with 4 turns of the same wire, on the same media, from the “cold” L2 side, also called ground side.
Connect an antenna to receive signals in OC, possibly adjusted to the wavelength, or a stub, the old gang that has been chosen to receive. For example if I want to receive from 23 – 30MHz, choose a dipole receiver for 26-27 MHz with an appropriate length of wire should also receive something, but I have not personally tried.
When you turn on your receiver, you sling the potentiometer of the reaction, and is always kept on the limit of self-oscillation, this is indeed the point of maximum sensitivity of the receiver, but is also relatively complicated to keep exactly to the limit of self-oscillation. With some practice it will not be hard to use it.
Pingback: Continuing
Pingback: Full Report
Pingback: please click the following webpage
Pingback: Discover More Here
Pingback: Go Here
Pingback: Going On this site
Pingback: home-page
Pingback: mouse click the next article
Pingback: helpful resources
Pingback: Read Far more
Pingback: just click the next web site
Pingback: Read the Full Write-up
Pingback: click through the following internet site
Pingback: Highly recommended Site
Pingback: please click the following web site
Pingback: Learn More Here
Pingback: please click the up coming website page
Pingback: main page
Pingback: click through the up coming article
Pingback: related web site
Pingback: More about the author
Pingback: mouse click for source
Pingback: relevant resource site
Pingback: Full Content
Pingback: similar web-site
Pingback: related web site
Pingback: simply click the following internet site
Pingback: similar web page
Pingback: simply click the next web page
Pingback: relevant internet site
Pingback: simply click the next website
Pingback: simply click the following web site
Pingback: homepage
Pingback: simply click the up coming article
Pingback: Suggested Internet site
Pingback: Keitha Dalene
Pingback: visit the next page
Pingback: visit the following post
Pingback: visit the next website page
Pingback: More Information
Pingback: additional reading
Pingback: visit the next page
Pingback: similar resource site
Pingback: click the next web page
Pingback: click the up coming website
Pingback: click through the next webpage
Pingback: Go At this site
Pingback: Going On this page
Pingback: just click
Pingback: just click the following web page